Dayton 13V780 2L200 Cogged V-Belt, Outside Length 20" | d:530 mm; D:780 mm; Limiting Speed - Oil:550 rpm; Axial Load Factor Y0:2.07; Roller Profile:Symmetric; B:250 mm; Nr. of Holes:8; da (min):558 mm; Axial Load Factor Y1:2.12; Constant e:0.32; Bore Type:Cylindrical Bore; Weight:417.000 kg; Limiting Speed - Grease:450 rpm; Axial Load Factor Y2:3.15; ra (max):5 mm; Enclosure:Open; Retainer Material:Machined Brass; Da (max):752 mm; Groove Width A:40 mm; |
Ingersoll Rand 89306294 5Pk1000 Micro Ribbed V-Belt, Outside Length 39" | d:53,975 mm; D:104,775 mm; Bearing number:45287/45220; Width (mm):30,162; (Grease) Lubrication Speed:3500 r/min; Outer Diameter (mm):104,775; T:30,162 mm; C:23,812 mm; Size (mm):53.975x104.775x30.16; B:30,958 mm; Basic dynamic load rating (C):130 kN; Basic static load rating (C0):169 kN; Bore Diameter (mm):53,975; Weight:1,17 Kg; |
Dayton 13V772 2L120 Cogged V-Belt, Outside Length 12" | Ca90 - Dynamic Thrust Rating (90 million revolutions)6:20400 N; K - Factor7:1.69; G1 - Heat Generation Factor (Roller-Raceway):38.5; da - Cone Frontface Backing Diameter:51.05 mm; Aa - Cage-Cone Backface Clearance:3.8 mm; Db - Cup Backface Backing Diameter:77.98 mm; e - ISO Factor8:0.35; R - Cone Backface To Clear Radius1:2.030 mm; Cup Part Number:Y32308; C90 - Dynamic Radial Rating (90 million revolutions)4:34600 N; |
Link Drives PowerTwist Drive B/17/5L - 5/8" width Link V-Belt - 6 Feet long | C:2,5 mm; d:1,5 mm; Width (mm):2,5; Size (mm):1.5x6x2.5; Basic dynamic load rating (C):0,25 kN; Outer Diameter (mm):6; r min.:0,1 mm; Bearing number:601X; D:6 mm; Bore Diameter (mm):1,5; B:2,5 mm; |
SIT ELATECH V032AT10K POLYURETHANE TIMING GEAR BELT AT10 TOTAL PROTECTION 6.9 M | Shaft dia.(h5)(max.):101.600; Grease lub.:2700; C0r:263.33; Bearing number:WJ-647224; (Refer.)Mass(kg):0.335; Weight / Kilogram:0.336; Number of Rows of Rollers:Single Row; Basic static load rating (C0):263.33 kN; Separable:No; Rolling Element:Needle Roller Bearin; Category:Needle Non Thrust Ro; Noun:Bearing; Enclosure:Not Applicable; Harmonized Tariff Code:8482.40.00.00; Outside Diameter:4.5 Inch | 114.3 Mil; |
Gates Synchro-Power Polyurethane Belt - T10 Pitch - 12mm Width - 178 Teeth | Basic static load rating (C0):79,3 kN; Width (mm):28; C:28 mm; Basic dynamic load rating (C):85 kN; (Grease) Lubrication Speed:2100 r/min; Size (mm):120x180x28; Bore Diameter (mm):120; d:120 mm; da max:136 mm; ra max.:2 mm; Outer Diameter (mm):180; Bearing number:6024-2RS; Weight:2,07 Kg; r min.:2 mm; Da max.:171 mm; B:28 mm; D:180 mm; da min.:129 mm; |
ELATECH V032AT10A02240 Polyurethane Timing Belt | Basic static load rating (C0):58 kN; Bore Diameter (mm):90; B:64 mm; d:90 mm; Outer Diameter (mm):190; Width (mm):64; r1 min.:3 mm; D:190 mm; Weight:8,8 Kg; r2 min.:3 mm; C:64 mm; Size (mm):90x190x64; Bearing number:2318; Basic dynamic load rating (C):151 kN; |
40T10/2200V POLYURETHANE ATTACHMENT TIMING BELT 40T10 / 2200V | Width (mm):19; Outer Diameter (mm):85; Size (mm):45x85x19; Bore Diameter (mm):45; d1:40 mm; d:45 mm; D:85 mm; B2:11 mm; Bearing number:1209K+H209; B:19 mm; B1:33 mm; C:19 mm; |
No. | Brand | T | A | S | r | R | J | K | F |
89265052 | - | - | - | - | - | - | - | - | - |
V032AT20A01200 | - | - | - | - | - | - | - | 12 mm | - |
195 | - | - | - | - | - | - | - | - | - |
13V779 | - | - | - | - | - | - | - | - | - |
V032E8A00800X | - | - | - | - | - | - | - | - | - |
1-1/4'' | - | - | - | - | - | - | - | - | - |
4940065 | - | - | - | - | - | - | - | - | - |
13V772 | - | - | - | - | - | - | - | - | - |
40T10/2200V | - | - | - | - | - | - | - | - | - |
V015HT5A02185/Z | - | - | - | - | - | - | - | 37 mm | - |
17 | - | 21,006 mm | - | - | 1,5 mm | 1,5 mm | - | - | - |
13V781 | - | - | - | - | 1 mm | - | - | - | - |
89306294 | - | 30,162 mm | - | - | - | - | - | - | - |
13V778 | - | - | - | - | - | - | - | - | - |
V032AT10A02240 | - | - | - | - | - | - | - | - | - |
13V770 | - | - | 50 mm | - | - | - | - | - | - |
T10 | - | - | - | - | - | - | - | - | - |
22 | - | - | - | - | - | - | - | - | - |
9" | - | - | - | 2,2 mm | - | - | - | - | 112,5 mm |
13V774 | - | - | - | - | - | - | - | - | - |
13V783 | - | - | 20.5 mm | 12.7 mm | - | - | 78 mm | - | - |
5 | - | 146,05 mm | - | - | - | - | - | - | - |
13V775 | - | 55,562 mm | - | - | 1,5 mm | 1,5 mm | - | - | - |
89296560 | - | - | - | - | - | - | - | - | - |
13V780 | - | - | - | - | - | - | - | - | - |
13V776 | - | - | - | - | - | - | - | - | - |
Eagle Belting 70485701 V-Belt,4 Ribs,13-5/8" Outside Length Video
optibelt Round polyurethane belts RR / HRR
Optibelt round polyurethane belts consist of high quality materials which are produced as open-ended rolls in different diameters from 2 to 20 mm and ...
Urethane V-Belts - McMaster-Carr
Made of chemical- and abrasion-resistant polyurethane rubber, this belting is often used in light to medium duty power-transmission and conveying applications.
Urethane V-Belts
Products 1 - 15 of 15 — Poly-urethane V-belt fractional horsepower drive belts/bands. Welded endless. Sections M, 3L (also known as Z), A, B, ...
V-Belts - BEHAbelt
BEHAbelt uses high-quality PU (polyurethane) and TPE (polyester) materials for the production of round belts, which guarantee an optimal performance and long ...
Timber Wolf Band Mill Urethane V-Belt for Norwood, Wood ...
Urethane v-belts are designed to run on gasoline and diesel powered band saws only and cannot be used as a drive belt. (Application Guide below). Urethane V- ...
Shop Our Polyurethane V Belt Online | EAGLE - Fenner Drives
Eagle Reinforced Polyurethane Belting is the high-strength, low-stretch choice for longer conveyor lengths, heavier conveyed loads, or medium-duty power ...
Polyurethane / Industrial Drive Belts / Power Transmiss...
Results 1 - 24 of 5000+ — Online shopping for Industrial & Scientific from a great selection of Timing Belts, V-Belts, Conveyor Belts, Flat Belts, Belt & Chain ...
Urethane Belting - Stiles Enterprises Inc.
Stiles specializes in packaging machinery replacement parts and belting which includes Link / Tab urethane V-belts.
Urethane V-Belts (Plastic Vee Belting) - Dura-Belt
Urethane V-belts are designed for fractional horsepower or light weight belting applications. They are usually not suited for high horse power or timing ...