| Dayton 13V772 2L120 Cogged V-Belt, Outside Length 12" | Ca90 - Dynamic Thrust Rating (90 million revolutions)6:20400 N; K - Factor7:1.69; G1 - Heat Generation Factor (Roller-Raceway):38.5; da - Cone Frontface Backing Diameter:51.05 mm; Aa - Cage-Cone Backface Clearance:3.8 mm; Db - Cup Backface Backing Diameter:77.98 mm; e - ISO Factor8:0.35; R - Cone Backface To Clear Radius1:2.030 mm; Cup Part Number:Y32308; C90 - Dynamic Radial Rating (90 million revolutions)4:34600 N; |
| Gates Synchro-Power Polyurethane Belt - T10 Pitch - 12mm Width - 178 Teeth | Basic static load rating (C0):79,3 kN; Width (mm):28; C:28 mm; Basic dynamic load rating (C):85 kN; (Grease) Lubrication Speed:2100 r/min; Size (mm):120x180x28; Bore Diameter (mm):120; d:120 mm; da max:136 mm; ra max.:2 mm; Outer Diameter (mm):180; Bearing number:6024-2RS; Weight:2,07 Kg; r min.:2 mm; Da max.:171 mm; B:28 mm; D:180 mm; da min.:129 mm; |
| Ingersoll Rand 89306302 7Pk1080 Micro Ribbed V-Belt, Outside Length 42-1/2" | Bearing number:6213; D:120 mm; C:23 mm; Width (mm):23; Size (mm):65x120x23; Bore Diameter (mm):65; d:65 mm; Outer Diameter (mm):120; B:23 mm; |
| Ingersoll Rand Micro Ribbed V-Belt Polyurethane 58" Outside Length 89265060 | Bearing number:USFL203; J:76,5 mm; B1:22 mm; A1:11 mm; e:15 mm; Weight:0,4 Kg; s:6 mm; A2:31 mm; d:17 mm; L:57 mm; Basic dynamic load rating (C):9,55 kN; Bore Diameter (mm):17; H:99 mm; Thread (G):M6x1; N:12 mm; D1:24,6 mm; A:25,5 mm; |
| SIT ELATECH V032AT10K POLYURETHANE TIMING GEAR BELT AT10 TOTAL PROTECTION 6.9 M | Shaft dia.(h5)(max.):101.600; Grease lub.:2700; C0r:263.33; Bearing number:WJ-647224; (Refer.)Mass(kg):0.335; Weight / Kilogram:0.336; Number of Rows of Rollers:Single Row; Basic static load rating (C0):263.33 kN; Separable:No; Rolling Element:Needle Roller Bearin; Category:Needle Non Thrust Ro; Noun:Bearing; Enclosure:Not Applicable; Harmonized Tariff Code:8482.40.00.00; Outside Diameter:4.5 Inch | 114.3 Mil; |
| Ingersoll Rand 89306294 5Pk1000 Micro Ribbed V-Belt, Outside Length 39" | d:53,975 mm; D:104,775 mm; Bearing number:45287/45220; Width (mm):30,162; (Grease) Lubrication Speed:3500 r/min; Outer Diameter (mm):104,775; T:30,162 mm; C:23,812 mm; Size (mm):53.975x104.775x30.16; B:30,958 mm; Basic dynamic load rating (C):130 kN; Basic static load rating (C0):169 kN; Bore Diameter (mm):53,975; Weight:1,17 Kg; |
| SIT / ELATECH V032AT20A01200 POLYURETHANE TIMING GEAR BELT 60T | da - min.:1094 mm; Da - max.:1466 mm; Width (mm):438; d:1060 mm; Calculation factor - Y0:2.5; Bore Diameter (mm):1500; Calculation factor e:0.26; Reference speed:150 r/min; Mass bearing:2515 kg; K:12 mm; Basic static load rating - C0:45500 kN; Limiting speed:260 r/min; Outer Diameter (mm):1060; d2:1199 mm; Calculation factor - Y1:2.6; r1,2 min.:9.5 mm; Calculation factor - Y2:3.9; Da max.:1466 mm; |
| Ingersoll Rand 89296560 5Pk1080 Micro Ribbed V-Belt, Outside Length 42-1/2" | C:32 mm; Bearing number:20219; Bore Diameter (mm):95; Width (mm):32; Size (mm):95x170x32; Outer Diameter (mm):170; B:32 mm; D:170 mm; d:95 mm; |
| No. | Brand | T | A | S | r | R | J | K | F |
| 195 | - | - | - | - | - | - | - | - | - |
| V032E8A00800X | - | - | - | - | - | - | - | - | - |
| 13V778 | - | - | - | - | - | - | - | - | - |
| 9" | - | - | - | 2,2 mm | - | - | - | - | 112,5 mm |
| 13V784 | - | - | - | - | - | - | - | - | - |
| 7760-2003 | - | - | - | - | - | - | - | - | - |
| 13V775 | - | 55,562 mm | - | - | 1,5 mm | 1,5 mm | - | - | - |
| 89265052 | - | - | - | - | - | - | - | - | - |
| 13V774 | - | - | - | - | - | - | - | - | - |
| V032AT10A02240 | - | - | - | - | - | - | - | - | - |
| 70485701 | - | - | 290.00 mm | - | - | - | 540 mm | - | - |
| 13V773 | - | - | - | - | - | - | - | - | - |
| 5 | - | 146,05 mm | - | - | - | - | - | - | - |
| B/17/5L | - | - | - | - | - | - | - | - | - |
| 4940065 | - | - | - | - | - | - | - | - | - |
| 13V781 | - | - | - | - | 1 mm | - | - | - | - |
| 13V779 | - | - | - | - | - | - | - | - | - |
| K51 | - | - | - | - | - | - | - | - | - |
| 89306294 | - | 30,162 mm | - | - | - | - | - | - | - |
| 13V772 | - | - | - | - | - | - | - | - | - |
| 22 | - | - | - | - | - | - | - | - | - |
| T10, | - | - | - | - | - | - | - | - | - |
| 13V770 | - | - | 50 mm | - | - | - | - | - | - |
| 89296560 | - | - | - | - | - | - | - | - | - |
| V032AT10K | - | - | - | - | - | - | - | - | - |
| V015HT5A02185/Z | - | - | - | - | - | - | - | 37 mm | - |
| V032AT20A01200 | - | - | - | - | - | - | - | 12 mm | - |
| 40T10/2200V | - | - | - | - | - | - | - | - | - |
| 1-1/4'' | - | - | - | - | - | - | - | - | - |
| 89306302 | - | - | - | - | - | - | - | - | - |
Twin V-Belt, Polyurethane Material, 1-1/4'' D Video
Urethane V-Belts - McMaster-Carr
Made of chemical- and abrasion-resistant polyurethane rubber, this belting is often used in light to medium duty power-transmission and conveying applications.
Shop Our Polyurethane V Belt Online | EAGLE - Fenner Drives
Eagle Reinforced Polyurethane Belting is the high-strength, low-stretch choice for longer conveyor lengths, heavier conveyed loads, or medium-duty power ...
Urethane V-Belts (Plastic Vee Belting) - Dura-Belt
Urethane V-belts are designed for fractional horsepower or light weight belting applications. They are usually not suited for high horse power or timing ...
Urethane Belting - Stiles Enterprises Inc.
Stiles specializes in packaging machinery replacement parts and belting which includes Link / Tab urethane V-belts.
V-Belts - BEHAbelt
BEHAbelt uses high-quality PU (polyurethane) and TPE (polyester) materials for the production of round belts, which guarantee an optimal performance and long ...
Polyurethane / Industrial Drive Belts / Power Transmiss...
Results 1 - 24 of 5000+ — Online shopping for Industrial & Scientific from a great selection of Timing Belts, V-Belts, Conveyor Belts, Flat Belts, Belt & Chain ...
Urethane V-Belts
Products 1 - 15 of 15 — Poly-urethane V-belt fractional horsepower drive belts/bands. Welded endless. Sections M, 3L (also known as Z), A, B, ...
optibelt Round polyurethane belts RR / HRR
Optibelt round polyurethane belts consist of high quality materials which are produced as open-ended rolls in different diameters from 2 to 20 mm and ...
Timber Wolf Band Mill Urethane V-Belt for Norwood, Wood ...
Urethane v-belts are designed to run on gasoline and diesel powered band saws only and cannot be used as a drive belt. (Application Guide below). Urethane V- ...